a shady backyard in the melbourne suburbs

5 Tips on Choosing The Best Location For Your Water Tank

Water tanks are something that helps you to harvest and save water during the rainy seasons. You can use the water saved for many other reasons, especially when it gets very dry in the summer you can use the water that you have stored in your water tanks in your house or anywhere else. It is also good to build a water tank to help with sustainable living on Earth. Whether you’re in Melbourne or New York, here are some things that can help you build your water tank at the best location to get the maximum result possible.

The Slope of the Site – Choose a location that is away from retaining walls to ensure that you have water in your tank. Also, choose a location that is low so that the run-off water will come and get stored in your water tank for use. 

Proximity to Toilets and Laundry – If you are going to use the water in your bathroom or to do your laundry you will need a plumber to fix it. That means you should have your water tank near your house so that you don’t need to spend more money on extra material and installation time for pipes.

Downpipe Location – Water harvesting is efficient and harvests more when you have a downpipe connecting to your tanks from various locations. Diverting pipes for long distances can lead to a lot of expenses and compromises in the efficiency of work. This works even better if you’re installing an underground rainwater tank.

notebook to write compliances checklist

The Consumer Compliance Checklist – Before purchasing water tanks, check the customer compliance checklist and see what it says. Some people will ask you to pay more for a particular location for setting up your water tanks.

Select a Tank that Suits Your Location – Water tanks in New York may not have the same design and requirements as Melbourne water tanks. You can either choose to place at another place or choose a different shape and size. They are plenty of colours and sizes. You can choose from them.

Knowing the perfect place to install your water tank can tell its performance and durability. Talk about it to a well-experienced manufacturer who can give you suggestions on the water tank that suits your location and price range.

There are some aspects that you need to take a look at for installing your own water tank at the perfect location for its good performance. Here is the information that you will need to check:

1. Check the area around the house and office where the majority of the water will be used. Make sure the tank is located near those locations.

2. Have enough space to set the tank up and also have space for access for the performance of maintenance tasks.

3. Check and make sure that you have all the local laws and guidelines followed for building your water tank.  

4. To make sure that your expenses are less, keep your tanks near to downpipes and storm drains.

5. Make sure that you consider your neighbours as making a pump may cause a lot of noise. Getting a pump cover is good as it will help with the noise and can increase the lifespan. 

6. Make sure that the pump and tank do not give any strain on the houses nearby due to the pressure from the pump. If the pressure is too much, it may cause damage to the houses near your house and nearby the water tank.

Build your own water tank by following these steps to choose the location for the setting up of the water tank and spend your days without wasting any water by saving it.

Leave a Reply

Your email address will not be published. Required fields are marked *